Variable speed pump control device. The Active Driver starts the pump as soon as it detects a demand for water. Supplied complete with small pressure vessel, wall mounting bracket and inlet and outlet fittings. Ready to install.
Active Drive Plus
Model | Price |
Active Drive Plus M/M1.1 | £575.00 |
Active Drive Plus M/M1.5 | £745.00 |
Active Drive Plus M/M1.8 | £825.00 |
Active Drive Plus M/T2.2 | £895.00 |
Call to enquire 01769 579487
Download Product Specification PDF
Description
The Active Driver starts the pump as soon as it detects a demand for water. The speed of the pump is constantly regulated at the minimum value that meets the request of the user, this ensures that the pump uses the minimum amount of electricity required. The pump pressure can be adjusted using the active driver display. The Active Driver will stop the pump in the event of pump overload, dry running, low voltage, maximum pressure exceeded or electronics overheating.
Inverter pump control device.
Advantages:-
- Constant pressure
- Quiet operation
- Economical
- Less maintenance
- Smaller foot print – only requires a small pressure tank
- Built in dry run protection
- Complete protection of the pump from faults
- Suitable for use with surface and submersible pumps
- Built in NRV
- Easy pressure adjustment (+ and – buttons on display)
- Also available as a single unit without manifold
Technical Data
Installation: Vertical or horizontal
Max fluid temperature: 50°C
Protection rating: IP55
Maximum flow: 18 m³/h 300 lpm
Voltage: 115V 230V single phase 400V three-phase
Model | A | B | C | DNM | DNA | Pressure Adjustment |
Active Drive Plus M/M1.1 | 237 | 282 | 185 | 1.5″ | 1.25″ | 1 to 9 |
Active Drive Plus M/M1.5 | 237 | 282 | 185 | 1.5″ | 1.25″ | 1 to 9 |
Active Drive Plus M/M1.8 | 237 | 282 | 185 | 1.5″ | 1.25″ | 1 to 9 |
Active Drive Plus M/T2.2 | 237 | 282 | 185 | 1.5″ | 1.25″ | 1 to 13 |
Reviews
There are no reviews yet.